savvymatches
Succulent Mold | Candle Mold | Silicone Mold
Regular price
$4.99
Succulent Plant Silicone Mold | Candle Mold | Silicone Mold | (Candle Not Included)
Each order comes with 1 piece silicone mold only.
Color of the silicone: Semi White/Light Gray
Recommended Wax: Paraffin Wax or Beeswax (Soy wax is a softer wax so the wax might break when you release the wax from the mold. You can start at 70% soy and 30% paraffin/beeswax to test and go down on soy to 50/50 depending on your results.
Please note that the molds do not have a wick hole, so if you're using this mold for candle making, you will need a wick needle, wick pin or skewer for your wick.
TIPS for the wicks & other tips:
Allow the wax to cool for 20-30 minutes. The succulent will unmold the easiest if the wax is slightly warm to the touch, but not hot. Carefully remove the wax from the mold paying close attention to all of the thin petals. Before the succulent is completely cooled, gently poke a hole in the center for the wick using a wick pin or bamboo skewer. Set aside to cool completely.
If you are making a candle base, let the candle begin to cool naturally, but not fully. Be sure to keep an eye on your candle so it doesn't cool too much. The very top layer of the wax should still be liquid while the cooled wax below is able to support the weight of the succulent. If the wax has started to form a skin, use the heat gun to quickly liquify the wax.
Thread the wick through the succulent and gently press it into place, allowing it to sink slightly into the wax. This will slightly displace the wax, so be careful not to push too hard or your candle surface will not be smooth. Repeat this process if you have remaining succulents.
STYLE A
3.7*3.5*1.6in Volume: 50ml
STYLE C
3.2*2.8*1.4in Volume: 37ml
STYLE D
2.7*2.1in Volume: 34ml
STYLE E
3.3*3.2*1.5in Volume: 46ml
STYLE J
1.77*1.14 In Volume: 7ml
STYLE Q
2.2*2.2*1.5 In Volume: 20ml
STYLE R
3*2.9*1.6In Volume: 48ml
STYLE S
3*2.9*1.5In Volume: 36ml
STYLE T
3.1*2.9*1.5In Volume: 65ml
STYLE U
2.2*1.8*1.2In Volume: 13ml
STYLE V
2.2*2.1*1.1In Volume: 22ml
STYLE W (TINY SIZE)
1.4*1.4*0.9In Volume; 5ml
STYLE X
3.1*2.8*1.9In Volume: 57ml
Each order comes with 1 piece silicone mold only.
Color of the silicone: Semi White/Light Gray
Recommended Wax: Paraffin Wax or Beeswax (Soy wax is a softer wax so the wax might break when you release the wax from the mold. You can start at 70% soy and 30% paraffin/beeswax to test and go down on soy to 50/50 depending on your results.
Please note that the molds do not have a wick hole, so if you're using this mold for candle making, you will need a wick needle, wick pin or skewer for your wick.
TIPS for the wicks & other tips:
Allow the wax to cool for 20-30 minutes. The succulent will unmold the easiest if the wax is slightly warm to the touch, but not hot. Carefully remove the wax from the mold paying close attention to all of the thin petals. Before the succulent is completely cooled, gently poke a hole in the center for the wick using a wick pin or bamboo skewer. Set aside to cool completely.
If you are making a candle base, let the candle begin to cool naturally, but not fully. Be sure to keep an eye on your candle so it doesn't cool too much. The very top layer of the wax should still be liquid while the cooled wax below is able to support the weight of the succulent. If the wax has started to form a skin, use the heat gun to quickly liquify the wax.
Thread the wick through the succulent and gently press it into place, allowing it to sink slightly into the wax. This will slightly displace the wax, so be careful not to push too hard or your candle surface will not be smooth. Repeat this process if you have remaining succulents.
STYLE A
3.7*3.5*1.6in Volume: 50ml
STYLE C
3.2*2.8*1.4in Volume: 37ml
STYLE D
2.7*2.1in Volume: 34ml
STYLE E
3.3*3.2*1.5in Volume: 46ml
STYLE J
1.77*1.14 In Volume: 7ml
STYLE Q
2.2*2.2*1.5 In Volume: 20ml
STYLE R
3*2.9*1.6In Volume: 48ml
STYLE S
3*2.9*1.5In Volume: 36ml
STYLE T
3.1*2.9*1.5In Volume: 65ml
STYLE U
2.2*1.8*1.2In Volume: 13ml
STYLE V
2.2*2.1*1.1In Volume: 22ml
STYLE W (TINY SIZE)
1.4*1.4*0.9In Volume; 5ml
STYLE X
3.1*2.8*1.9In Volume: 57ml